Snakeskin-pattern fenders, with highly polished look. A little bit retro. 50mm wide, designed for 26" wheels. Work with tyres up to 42mm wide. Hardware kit included. Contains 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions. Rear fender is 120cm long, front 90cm. Pre-drilled.More info & orderRackTireHeadsetBarplugBellBidonBottlecageBrooks spare partsCranksetDecaleurDerailleurmiscellaneousPanniersToolsGripsCableBasketHubHubdynamoPedalPumpBrakeBrakeleverBrake CablesFenderMudflapMirrorsHandlebarBartapeQuillstemHandlebar BagToeclipstrapToeclipBottombracketRimLightShifterStemFrontrackWheelsSaddlebagSeatpostSaddleBrooks CambiumBrooks saddleBrooksDeal
Products
Snakeskin-pattern fenders, with highly polished look. A little bit retro. 50mm wide, designed for 26" wheels. Work with tyres up to 42mm wide. Hardware kit included. Contains 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions. Rear fender is 120cm long, front 90cm. Pre-drilled.More info & order
Snakeskin-pattern fenders, with highly polished look. A little bit retro. 50mm wide, designed for 650b and 27.5" wheels. Work with tyres up to 42mm wide. Hardware kit included. Contains 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions. Rear fender is 120cm long, front 90cm. Pre-drilled.More info & order
Snakeskin-pattern fenders, with highly polished look. A little bit retro. 50mm wide, designed for 700c and 27" wheels. Work with tyres up to 42mm wide. Hardware kit included. Contains 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions. Rear fender is 120cm long, front 90cm. Pre-drilled.More info & order
These zeppelin profile fenders are available in polished silver and smooth black. 52mm wide, designed for 650b and 27.5" wheels. Work with tyres up to 44mm. A hardware kit is included. Contains 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions. Rear fender is 120cm long, front 90cm. Pre-drilled.More info & order
These zeppelin profile fenders are available in polished silver and smooth black. 52mm wide, designed for 700c and 27" wheels. Work with tyres up to 42mm. A hardware kit is included. Contains 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions. Rear fender is 120cm long, front 90cm. Pre-drilled.More info & order
These fenders feature a classic hammered pattern and are available in high polished silver and smooth Noir. They're 45mm wide, designed for 700c and 27" wheels, and work with tires up to 37mm wide. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders.
Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions.
The rear fender is 120cm long, and the front 90cm.More info & order
These classic facetted-style aluminum fenders are based on an old French design. They have a simple, yet elegant pattern that's lovely on both classic and modern bikes. They're 45mm wide, designed for 700c and 27" wheels, and work with tires up to 37mm wide. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders.More info & order
Just a light bracket for Supernova back lights.
Weighs 12g, 15cm long and 6cm wide. Light and mount not included.More info & order
Old Skool, that is the name of this trend. A long, long time ago, when mountainbiking didn't exist, these were already here. And now they are available again. The Klunkerbar.
The Klunker is 680mm wide, has a comfortable 45° sweep, and 3" (7.6cm) of rise. The clamp diameter is 25.4mm and the grip area is 22.2mm - standard outer diameters for mountain and city brakes and shifters.
As a bonus, the interior diameter of the grip is 19.4mm, so it will accept bar-end shifters.
Specs:
Stem Clamp: 25.4mm
Grip: 22.2mm
Rise: 7.6cm
Sweep: 45 deg
Width: 680mmMore info & order
These Porteur bags are made right here in Maryland. The material is ballistic nylon so it's really tough and water resistant..The bottom is padded and there is a pocket at the back. The zippers are waterproof, so there's no need for a flap.
It can be carried with the included shoulder strap or like a hand bag. There are a couple of ways to attach the bag to the rack, with the buckles as shown above, or by using the daisy chains underneath.
They hold about 22-liters or 1340 cubic inches. The base is 31.5cm (12") x 26cm (10.25"). It's about 24cm tall, but can be extended if using the daisy chains to attach it to the rack. It is water resistant, but not 100% waterproof like a dry bag.More info & order
Height: 22cm
Width: 27cm
Depth: 19.5cm
Weight: ~736g
Includes carry strap
The Randonneur bag might look like a traditional bag, but it is actually made from modern materials. A design which perfectly blends looks and functionality. Perfect for touring, but also for everyday use. The bag is made in the US in its entirety, in a collaboration between Velo Orange and Road Runner Bags, based in Los Angeles.
The outer material is Cordura, extremely sustainable and waterresistant. The material on the inside of the bag is made of the same material that logistic comapnies use to cover cars for transport, so it is waterproof. The interior is not too complicated, making it easy to find your belongings in the most dim lighted environments.
It is possible to fit smaller bags to the Randonneur Bag, thanks to the special straps fitted to the side. This design makes it possible to build the perfect bag just for you. We currently provide the Snapper Sack (for compact cameras and SLR-lenses) and the Cell Phone Pocket (fits basically every smartphone). Both sold seperately.
The upper part of the bag has a storage compartment for your maps, snacks, keys, wallet etc. A waterproof zipper keeps everything safe and dry, and easy access, even while riding.
The bottom side has extra straps, to attach the bag to your rear rack.
The bag can be fitted to every front rack with an appropriate decaleur (or straps for the handlebar), however it is designed to fit best with our Randonneur en Campeur front racks. The back of the bag features grommeted holes, which match perfectly to our bag mount, and make sure your bag is safely attached. When using our intergrated decaleur racks, it is not needed to punch holes in your bag.
More info & order
This stem gives a unique clean look to your bike. The stack height is 75mm and is available in polished silver or black. The angle has a drop of 17 degrees, which means it usually sticks out straight.
Specs:
Handlebar Clamp: 31.8mm
Steerer Clamp: 1-1/8"
Angle: -17 degrees
Stack height: 75mm
Weight: 148gMore info & order