GrandBois DecaleurGrand Bois also makes decaleurs. And how! Refined pieces of forgings. There are 3 types. The NP is a decaleur for a Nitto pen. (NP comes from not pearl, because previously Nitto's quillstem were called "Pearl" until a judge decided that this was no longer allowed) Works with 1 bolt that provides the clamping of the stem. The CrMo version is for the stem with 2 bolts/nuts. That stem/superstructure is also manufactured at Nitto. The alloy version is for 'regular' stems. Plenty of choice...More info & order
Decaleur KitsDecaleurs are traditional quick-release mounts for handlebar bags. Unlike some modern bag mounts, they keep the bag low for better handling and for keeping the handlebars clear. The VO fork mount decaleurs are mounted on the fork's steerer tube either below the headset lock nut or within the spacer stack. Full stainless steel construction Available to fit 1" and 1-1/8" forks Works with most traditional-style bags such as Velo Orange, Acorn, Ostrich, Sologne, Berthoud, TA, LaFuma, and similar Receiver uses a 3mm thick spacer Bag Mount uses 6mm posts Mounting hardware included Posts are 8 cm forward of the front of the headset ring Please remember that a decaleur is intended as a quick-release mechanism, not a support for the full weight of the bag; the bag must still rest on a rack or on the fender. Fork mounted decaleurs can be bent slightly to adjust the bag's height, but they might not work with very tall or short frames (for those frames we recommend a front rack with an Integrated Decaleur). Note: We strongly recommend that you use at least one strap or elastic cord, in addition to the decaleur, to secure your bag to your front rack. If you hit a large bump or pothole, it is possible that your bag could bounce up, detaching the bag from the decaleur receiver.More info & order