Quillstem
NITTO Craft-2
Stem Cr-Mo steel chrome. Craft Piece of NITTO. Clamp diameter 25.4mm, Column diameter 22.2mm
More info & orderGenetic Hyoid stem
Classic Road Quill stem.
-15 Degree.
To suit 1″ steerer’s (22.2mm shaft)More info & orderNitto NTC 150
Stem aluminium forged. Angle 71°, Column 150mm/22.2mm, Clamp diameter 25.4mm
More info & orderVelo Orange Threadless Stem Adaptor
This adaptor allows you to use threadless stems on bikes that are designed for quill stems. Works with standard 22.2m threaded forks and 1 1.8" stems. It's 180mm in total length, 110mm above the minimum insertion line. Weighs 272 grams.More info & orderVelo Orange Quill Stem with removable faceplate
Now, there is nothing holding you back from combining any and all handlebars, with the simple 2-bolt removable faceplate that this stem comes with. It is compatible with modern 31.8mm clamp diameters and 'alt-bars' like the Velo Orange Crazy Bar. The 90 degree angle makes a bit of a rise without looking too out of place on your custom bike.
The quill diameter equals 22.2mm (for 1" steerer), and the max height above the minimal insertion is 130mm. Weighs 395 grams (100mm size).
Available in different lengths (80, 90, 100, 110mm) and different finishes; black, nickel and silver.More info & orderVelo Orange Quill Stem
Nice looking with a positive rise, 1" quill stem. Smooth welds and chromed. Looks good on any bike!
Clamp is 26mm wide, angle is about 17 degrees. The height above the minimal insertion is 120mm. Total height equals 190mm. Weighs 367 grams (100mm size).
More info & orderVelo Orange Grand Cru Quill Stem
Made from a custom one-piece steel quill and extension, de Grand Cru is a strong yet light stem with a classic look.
The clamp diameter is 26mm, and a quill diameter of 1". Angle of -17 degrees. The height above the insertion point is 120mm, with a total height of 180mm. Weighs 385 grams (100mm size). Available in different sizes.More info & orderGrand Bois quill stem
With double bolt/nut tightening. Beautifully chrome plated. Stem of 22,2 mm for a stem of 25,4 mm. With a cam for a bell on the side. Working height 80mm. Approximately 300 grams.More info & orderNitto Technomic quillstem 225mm
This is the classic Nitto Technomic spindle. The total length of the spindle is 23 cm, the part above the dashes 15.5 cm, which is the maximum length it can reach from the headstock, and different lengths in the front. Forged aluminum, nicely finished. Handlebar diameter is 26.0 mm or 25.4 mm.More info & order