Categories
Rack
Rivendell Rear Rack Shiny Stainless Steel• Tubular stainless steel • High-polished finish • Triangulated at stress points • Good for bikes with medium to longer chainstays (like most Rivendell bikes have) • Ample pannier support and bag hook points • Includes hardware to install on wheel axles, but Rivendell does not recommend using on bikes with QR skewers.More info & order
ElkhornThe Short fits tires up to 27.5 x 2.8″ or 700c x 50mm. The Tall is for maximum mud clearance and fits tires up to 29 x 3.25″. The Elkhorn is a slender multi-tool of a rack. Stable and secure with 3-pack mounts on the uprights for your favorite cargo or bottle cages and more tie-down points on the deck than you could ever need. Front or rear compatible, the Elkhorn lets you feel the trail beneath you rather than the tail wag behind you. Old Man Mountain racks are the most versatile racks available. Capable of mounting to suspension forks, full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, even tri-bikes if that’s what you’re into. Tested and trusted in the most extreme environments on earth (we’re still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter, cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn’t made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need.More info & order
Divide RackOld Man Mountain racks are the most versatile racks available. Capable of mounting to full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, even tri-bikes if that’s what you’re in to. Tested and trusted in the most extreme environments on earth (we’re still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn’t made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need.More info & order
Velo Orange Straight Arms for Campeur RacksThese are straight arms that are compatible with our Campeur Racks. They're made from 7mm aluminum alloy rod and are 250mm in length. While they are designed for VO racks, they should work fine on Nitto's offerings as well. You may also need daruma hardware to connect these to your rack.More info & order
Compression Daruma Hardware for Campeur Racks This is a set of stainless steel daruma hardware that is included with our Campeur Racks and is compatible with our cantilever or straight arms. This set is also compatible with Nitto's similar offerings. More info & order
Campeur Rear RackThe VO Campeur Rack is designed for touring and commuting. It features a fully tubular stainless steel design with an upper deck and lower rail system. The lower rail keeps weight low and allows for easy pannier removal, even with the top platform loaded with a tent or dry bag. Stainless steel construction with a lovely, high polish finish. It won't rust like painted steel racks or fatigue and crack like some aluminum and powder-coated or painted racks. Long, lower rail helps gets your pannier further back to eliminate heel clipping. Straight, upper arms securely mount to your bike's seat stay bosses. There are a pair of eyelets under the top platform for direct mounting to the fender. A single rear, threaded eyelet is for a light mount. The top platform is 10 cm wide and 27 cm long. From the top of the rack to the lowest hole is 36.5cm. The lower tangs feature four sets of holes to fit most bikes with 26", 650b, 700c, and 27" wheels. Simply trim what you don't need or use the bottommost hole for an easy and quick installation. Maximum weight is 40 lbs.More info & order
Constructeur Rear RackThe VO Constructeur Rear Rack fills the need for an elegant, small, and sturdy rear rack for those of us who don't need a heavy duty touring rack. It will accept a set of small panniers for a multi-day trip, serve as a platform for a saddle bag, or carry a rack-top bag. All VO racks are made from polished tubular stainless steel, so they will never rust or flake, and can be re-polished to a mirror shine even after years of use. The rack can be mounted two ways. Either directly to the rear fender using the threaded eyelets on the underside of the rack, or by using a strut (not included but available in regular or XL size) to mount to the seatstay bridge. The rack platform is 10.5cm x 26cm. The distance between the cross-pieces of the platform is 148mm. From the center of the bottom hole, the rack stands about 36cm tall. The mounting tangs are drilled in four spots to make it fit most bikes with 700c, 650b, or 26" wheels. 15lbs (6.8kg) maximum weight capacity.More info & order
Nitto rack staysNITTO optional stay NITTO Carrier. Aluminium stick 7mm / 400mm More info & order
Bella Ciao SuperbaTogether with a wonderful young lady and with one of the world’s most sophisticated producers of bicycle components we tackled an old problem. Rear racks of uncompromising functionality and beauty, can they really exist? – Well,now they do. Designed by the eyes and brain behind the well-known blog Lovely Bicycle! and produced by Tubus Carrier Systems in Germany, we are thrilled to introduce the BELLA CIAO “Superba” rear rack. In her own words the author of Lovely Bicycle! describes her inspiration: “Having fallen in love with the elegant curves of my Bella Ciao, I could not bear to clutter it up with a clunky rear rack. I envisioned a rack that was minimalist and lightweight, yet evoked the curved rear carriers found on vintage continental European bicycles. After some prototyping, the Superba rack was born - a utilitarian classic that harmonizes with the clean lines of Bella Ciao bicycles. “ And a utilitarian classic indeed it is. Minimalist, lightweight and with a loading capacity of 25kg! Content with the result of our collaboration Lovely Bicycle! suggested the name “Superba”. The BELLA CIAO rear rack “Superba” is exclusively produced by Tubus in Germany. Made of stainless steel, with a weight of 450 grams and a certified payload of 25 kg. Surface: glass bead blasted (silky gloss). Certified according to DIN EN 14872. Suitable for all BELLA CIAO bicycle models in all sizes.More info & order
Minoura AB-1600When you are a thirsty type. Carry a lot of water with you. Going without for a long time. Here the ideal solution for carrying lots of water. A PET bottle fits in it. 1.5liter per holder.More info & order
Minoura RC1000 RCLichtgewicht achterdrager van aluminium. Montage op nokjes of quick release. 580 gram. Dit rekje moet je niet té zwaar belasten. 7 kilo max.More info & order