HONJO H-31 650b 45mm beveledBeveled fender with 45mm width. For the slightly narrower tire... With all mounting materials.More info & order
RVS fender 28 inch 700c 55mmSmooth classic set fenders, 55mm wide. Front fender is 72cm long, rear fender is 122cm long. Pre-drilled for the fender bar. The front fender has a lip for easy mounting. On the rear fender there is a preparation for the rear light. With 2 rods, 2 eye bolts, 4 p-clips 2 leather washers and an attachment for the rear fender.More info & order
HONJO H-31C Hammered 700CAluminium polish Hammered, wide 45 mm, height 20 mm for 700x28-35C, R358x950(FR)x1200(RE). Fixation set, 1 pair of U stay 5mm, 4 tightening stays Maki (roll), 2 hangers, 2 tighting stay-fender.More info & order
P-clipsThese clips attach the fender stay to the dropout eyelet. They may be used with VO 5mm stays as well as fender stays from other brands. Includes screws and washers. Price is for a pack of four.More info & order
Honjo Daruma boltU-Stay fixing brass, 5mm by allen key. Sold by 4 pieces with 1 allen key, 4 leather washers More info & order
Fender ReinforcementsWith the proliferation of off-road touring and gravel bikes, we have started including these fender re-inforcements with all of our alloy fendersets. Just peel and stick under the screw during installation - one under the seat stay bridge and one under the fork crown. Available in 30 and 40mm widths. Sold as pairs.More info & order
FenderKit VeloOrangeThis hardware kit is compatible with VO, Honjo, Lefol, and pretty much any other proper metal fenders that use drawbolts. The kits are available in both Silver and Noir. Hardware Kit includes: 4 * R clips 7 * leather washers 8 * star washers 4 * M5 daruma bolts 4 * daruma cups 1 * M6 daruma bolt 1 * large washer for under fork crown 1 * rubber washer for under fork crown 1 * L-bracket 1 * M6 Phillips head bolt 4 * 12mm M5 bolts 1 * 20mm M5 bolt 2 * M6 nyloc nuts 5 * M5 nyloc nuts 5 * washers for M5 bolts 2 * washers for M6 bolts More info & order
Honjo GB650MLThis is a rare full scale hammered fender that will completely cover the size 42B Be Beautiful and Be Strong tires. These are original Grandbois patterns made by completely remaking the mold with special care. The hammered pattern, which is slightly smaller than other Honjo fenders, elegantly sums up the impression of the bike and enhances its beauty. Made of aluminum with a polished finish. 650x42B. Front and rear set (without accessories). Width 62mm, height 31 and length 96cm front and 125cm rear. Not drilled.More info & order
Honjo H27Aluminium polish Hammered, wide 35 mm, height 17 mm for 700x23-28C, R358x840(FR)x1200(RE). Fixation set, 1 pair of stay 4mm, 4 tightening stays Maki (roll), 2 hangers, 2 tighting stay-fender.More info & order
FenderStays VeloOrangeExtra stays to fit a variety of fender sizes. Polished aluminum 5mm rods. The stays are 40 cm long from the apex of the curve to the end of the stay. Sold in pairs.More info & order
Honjo H-80 650bEen spatbord met een gepolijste aluminium afwerking die glanst bij het poetsen. Controleer het type frame en de bandenmaat die u gebruikt voordat u een keuze maakt. Voor 650x42B. Set voor en achter. Met montagematerieaal, zoals stangen en P clips. De spatbordlipjes moet je apart aanschaffen. Net als de gaatjes, die moet je zelf boren.More info & order
Honjo H-50 650bThe H50 fender set from Honjo is one of the legendary highly polished classics from Japan. The fenders cover a tire width of up to 41 mm. Due to the particularly wide profile, water is perfectly collected in the sheet metal. This means that feet and cranks also remain dry. In addition, Honjo's handmade fenders have a classy look and a low weight. With mounting material 52mm wide. Length front 95cm and rear 1250mm.More info & order