Products
Toe-clips GrandCruHalf clips give you most of the advantages of a full toe clip, but without straps. They are fantastic for city bikes, touring bikes, or any bike when you want the extra efficiency of toe clips without the bother of straps. Highly recommended.
These are made of stainless steel and are extra deep to fit bulky street shoes and running shoes. Their length is about 65mm from the front of the pedal to the curve in the clip. A pair weighs 83 gr with hardware.
Per pair; hardware included.
A good quality toe clip and strap is ubiquitous on any classic and vintage bike. These are made from stainless steel and are available in two reach sizes (distance they stick out from the pedal): Medium, 58mm and Large, 64mm
Price is per pair. Mounting hardware included.More info & orderSon Coax adapterThe handy plug connection from hub dynamo to cable. Some skill with soldering is a plus. More info & orderTandem innercableTandem inner cable for brake or gear. STAINLESS STEEL. 3 meters long. and for the gear cable the diameter is 1.1mm and for the brake 1.5mm. The gear cable has a barrel or a bushing end and the brake a barrel or a pear. More info & orderDualco Grease gunPro Pump Action with spring loaded plunger & 2" Nozzle.
Push Type Utility Grease Guns require only one hand to operate and are ideal for working in confined areas where lever action guns are inconvenient. All models will handle multi-viscous lubricant grades, and are highly recomended for special purpose bulk lubricants.
• Lightweight, compact & easy to use
• Durable all metal construction
• Self activated priming
• Quick service, refill & cleaning
• Ground plunger & ball check
• Pinpoint accuracy
More info & orderTorpedo singlespeed hubWith freewheel function and fixed function
(Adjustment over seven turns with the screwdriver on the outside of the shaft)
Aluminum hub
Frame installation width: 120 mm Number of spoke holes
: 32
Shaft nut thread M10x1 Total shaft length
174 mm Flange distance
(symmetrical) 59 mm
Spoke hole diameter 67 mm
Spoke hole diameter 2.6 mm
Chainline 46 mm
Weight of hub: approx. 480 g
Drive mode Fixed gear:
Using a small flathead screwdriver, turn the set screw in the shaft on the sprocket side clockwise as far as it will go.
Note: In fixed gear, the pedals always rotate. Familiarize yourself with the riding mode before participating in traffic.
Drive Mode Freewheel:
Using a small flat-blade screwdriver, turn the adjustment screw clockwise as far as it will go, then turn it back 5 full turns.More info & orderRigida Ryde Andra 30 584mmIt is one of the most used rims for travel bikes and proves time after time that it is almost indestructible!
SHAPE - double wall
JOINT - pin
TIRE USE - tube
HOOK TYPE - crotchet
BRAKE TYPE - rim brake
WEIGHT RIM BRAKE - 718
ERD (MM) - 535
MECHINICAL TREATMENT - CNC
CHEMICAL TREATMENT - powder coated
black
SPOKE HOLES - 32
VALVE HOLE Ø 6,5 (MM)
MAX. SPOKE TENSION 1400(N)
TIRE WIDTH (MM)
28-57
AXLE LOAD (KG)
max 120More info & orderMKS AR-2 EzyThe AR-2 features a unique asymmetrical cage plate design that provides extra room inside the shaft for wide shoes compared to traditional pedals like the Sylvan Road. The AR-2 is designed to be used with toe clips and straps. But it can also be used without.
The Ezy system allows the pedals to be removed safely, quickly and without tools for travel, storage or flexibility.
Especially popular as an upgrade for folding bikes, people who take their bikes on public transport or on travel bikes with clutch systems.
To use the Ezy pedal, simply remove the yellow retaining ring and pull back the collar attached to the crank arm to release or mount the pedal.
The stopper must be installed. If the stopper is not installed, the attachment of the pedal is incomplete.
Without the stopper, the adapter may break, or the pedal may fall off resulting in serious injuryMore info & orderDia-Compe ENE 11s Road and 10s Dynasys Downtube ShiftersWith a total cable pull of over 50 mm, these shifters work with just about any derailleur. Suitable for Shimano 11 speed road bikes, Shimano 10 speed mountain bikes (Dynasys) and Sensah SRX. Here's what you need to know:
Designed for 11 speed, but also works with fewer gears.
Better option for 10 speed drivetrains than our other Dia-compe levers
Friction (non-indexed), micro ratchet design
Right cylinder is larger than the left for more pull on the cable
Not compatible with bar end or "thumbie" mounts due to the oversized barrel
To calculate the total cable pull for your drive, use the following formula:
total cable pull = cable pull of the intended shifter * (s - 1), where s is the number of gears on your cassette. If the total is less than 50mm, these shifters should work.
More info & orderDIA-COMPE 2001Hanger for your centerpull or cantilever brake.More info & orderNitto SP72Seat Post NITTO Approved NJS for KEIRIN Pro. Aluminium forged, Fixation by two bolts, diameter 27.2mm, Length 250mm, Offset 22mm, Rail wide 44mm, 290gMore info & orderNitto NTC 150Stem aluminium forged. Angle 71°, Column 150mm/22.2mm, Clamp diameter 25.4mm
More info & orderVelogicalThe VELOGICAL RIM DYNAMO is an extremely lightweight high end LED lighting power system for bicycles in a miniature form-factor. Its ‘hard skills’ are extremely smooth running (low drag) even at high riding speeds, minimal weight and high efficiency for use with modern LED bicycle lights. This compact dynamo genuinely weighs less than a mere 75g! And it operates with minimal resistance, below the perception threshold. Thanks to highest electrical efficiency it supports passive safety in traffic while working as a daylight running light, too. This patented bicycle dynamo for LED lighting has been developed especially for the requirements of sports-oriented cyclists and year-round cyclists.More info & order