This Shiftmate is just to improve the cable line into the rear mech, it leads to crisper gear changes.
Replaces older items (no longer available) such as Avid Rollamajig, Mr Control Roller (really for V-brakes), Acor Pizza Cutter, Tiso P-Pue and Crud Cog Hog.
- CNC machined.
- Sealed ball bearing.
- Hard Nickel plating.
- Reduces cable friction and cable housing length.
- Small compact design only 14 grams.More info & orderBella CiaoBerthoudCyclesBLBBrave Machine ComponentsBuschMullerCrane BellsDia-CompeMiscellaneousGevenalleGrandBoisGreppGropesHALOHonjoHopetechH+SONInterlocRacingDesignJtekKoolstopLiberteCyclesMicheMicroshiftMinouraMKSNewbaumNittoNovaTecOld Man MountainOstrichPacentiPanaracerRestrapRivendellRohloffRoyceRustinesSamuraiSchlumpfSchmidt Original NabendynamoShimanoShutter PrecisionSilcaSomaSpecialites TASuginoSunXCDSupernovaSpurCyclesSteve PottsTanankaTangeTektroTRPTubolitoVelocityVelogicalVeloOrangeVeloxWaldWeraWTBYokozumaZefalBrooks B17Brooks B17 specialBrooks NOSBrooks BagBrooks Bag
Jtek
This Shiftmate is just to improve the cable line into the rear mech, it leads to crisper gear changes.
Replaces older items (no longer available) such as Avid Rollamajig, Mr Control Roller (really for V-brakes), Acor Pizza Cutter, Tiso P-Pue and Crud Cog Hog.
- CNC machined.
- Sealed ball bearing.
- Hard Nickel plating.
- Reduces cable friction and cable housing length.
- Small compact design only 14 grams.More info & order
Designed for mixing Shimano 11 speed road STI with Shimano 11 speed MTN derailleur.
To use the other way ie Shimano 11 speed MTN shifter with Shimano 11 speed road derailleur, fit the Shiftmate at the shifter.
- CNC machined.
- Sealed ball bearing.
- Hard Nickel plating.
- Reduces cable friction and cable housing length.
- Small compact design only 17 grams.
- Save money by upgrading over time or using components and wheelsets you already own.More info & order
This model is for mating Shimano 11 road STI levers with Shimano 11 MTN rear derailleur and cassette or 11 speed MTN rapidfire levers with Shimano 11 speed road rear derailleur and cassette.
The ShiftMate Straight is an inline shifting interface device for mating different bicycle shifting components. Using a ratio changing pulley, the ShiftMate Straight adapts different component brands and models to make the proper correction in the amount of cable pull needed for perfect shifting.
- CNC machined.
- Sealed ball bearing.
- Hard Nickel plating.
- Ideal for straight cable run mounting or mounting at cable stop locations.More info & order
This model is for mating Shimano & Campagnolo triple road shifters with mountain bike front derailleurs and cranks or mountain bike front shfiters with road triple cranksets.
For matching Campagnolo 11s Ergo Shifters with wide Shimano 11s cassettes using the 10s Shimano mech which was originally designed for max 36t.
In practice with some adjustment of the 'B' stop screw 40 and probably 42 are achievable.
The ShiftMate Straight is an inline shifting interface device for mating different bicycle shifting components. Using a ratio changing pulley, the ShiftMate Straight adapts different component brands and models to make the proper correction in the amount of cable pull needed for perfect shifting.
- CNC machined.
- Sealed ball bearing.
- Hard Nickel plating.
- Ideal for straight cable run mounting or mounting at cable stop locations.More info & order
This model is for mating Shimano shifters with SRAM 1:1 derailleurs or SRAM non-road shifters with Shimano derailleurs.
It will also let you run Shimano 10 speed road STI with Shimano MTN 10 derailleurs and Shimano or SRAM 10 speed cassettes.
The ShiftMate Straight is an inline shifting interface device for mating different bicycle shifting components. Using a ratio changing pulley, the ShiftMate Straight adapts different component brands and models to make the proper correction in the amount of cable pull needed for perfect shifting.
- CNC machined.
- Sealed ball bearing.
- Hard Nickel plating.
- Ideal for straight cable run mounting or mounting at cable stop locations.
*Except Shimano Tiagra 4700 10 speed shifters and rear derailleurMore info & order
This model is for mating Campagnolo 2001+ shifters with SRAM 1:1 derailleurs. - see compatiblity guide.
The ShiftMate Straight is an inline shifting interface device for mating different bicycle shifting components. Using a ratio changing pulley, the ShiftMate Straight adapts different component brands and models to make the proper correction in the amount of cable pull needed for perfect shifting.
- CNC machined.
- Sealed ball bearing.
- Hard Nickel plating.
- Ideal for straight cable run mounting or mounting at cable stop locations.More info & order
This model is for mating older Pre-2001 8 & 9 speed Campagnolo components with Shimano 8 & 9 speed components. You can also match newer Campagnolo 11 speed with Shimano 10 speed components. Please check the link above for all suitable combinations.
Using a ratio changing pulley, the ShiftMate adapts different component brands and models to make the proper correction in the amount of cable pull needed for perfect shifting. There are no comprimises when using a ShiftMate. Your shifting will perform equally or better than original factory components.
- CNC machined.
- Sealed ball bearing.
- Hard Nickel plating.
- Reduces cable friction and cable housing length.
- Wide range of component mates and interfacing.
- Small compact design only 12 grams.
- Save money by upgrading over time or using components and wheelsets you already own.
*Except Shimano Tiagra 4700 10 speed shifters and rear derailleur
2001 and newer Campagnolo shifters and derailleurs are not compatible with older versions.More info & order
This model is for mating newer 2001+ Campagnolo 9 & 10 speed components with Shimano 9 & 10 speed components.
- Shimano 9 & 10 speed shifters to Campagnolo 9 & 10 speed cassettes & derailleur
- Campagnolo 9 & 10 speed shifters to Shimano 9 & 10 speed cassettes & derailleur
Using a ratio changing pulley, the ShiftMate adapts different component brands and models to make the proper correction in the amount of cable pull needed for perfect shifting. There are no comprimises when using a ShiftMate. Your shifting will perform equally or better than original factory components.
- CNC machined.
- Sealed ball bearing.
- Hard Nickel plating.
- Reduces cable friction and cable housing length.
- Wide range of component mates and interfacing.
- Small compact design only 12 grams.
- Save money by upgrading over time or using components and wheelsets you already own.
*Except Shimano Tiagra 4700 10 speed shifters and rear derailleurMore info & order
This model is for mating different speed shifters to different speed drivetrains.
Most notably Campagnolo 12 speed Ergopower to work with Shimano or SRAM 12 speed MTN rear mech and cassette.
The ShiftMate is a shifting interface device for mating different bicycle shifting components and wheelsets. Using a ratio changing pulley, the ShiftMate adapts different component brands and models to make the proper correction in the amount of cable pull needed for perfect shifting. There are no comprimises when using a ShiftMate. Your shifting will perform equally or better than original factory components.
- CNC machined.
- Sealed ball bearing.
- Hard Nickel plating.
- Reduces cable friction and cable housing length.
- Wide range of component mates and interfacing.
- Small compact design only 12 grams.
- Save money by upgrading over time or using components and wheelsets you already own.
*Except Shimano Tiagra 4700 10 speed shifters and rear derailleurMore info & order
This model is for mixing wheelsets or Campagnolo & Shimano 8, 9 & 10 shifting combinations. Please check the link to the compatibility chart for all suitable combinations.
- Shimano 8, 9 & 10 speed shifters & derailleur to Campagnolo 8, 9 & 10 speed cassettes
- Campagnolo 8, 9 & 10 speed shifters & derailleur to Shimano 8, 9 & 10 speed cassettes
- SRAM 10 speed shifters to Campagnolo 10 speed derailleur and cassette
- Shimano 11 speed shifter & derailleur to SRAM or Shimano 10 speed
- SRAM 11 speed shifter & derailleur to SRAM or Shimano 10 speed
- Shimano 11 speed shifter & Shimano Tiagra 4700 10 speed derailleur to SRAM or Shimano 10 speed
Using a ratio changing pulley, the ShiftMate adapts different component brands and models to make the proper correction in the amount of cable pull needed for perfect shifting. There are no comprimises when using a ShiftMate. Your shifting will perform equally or better than original factory components.
- CNC machined.
- Sealed ball bearing.
- Hard Nickel plating.
- Reduces cable friction and cable housing length.
- Wide range of component mates and interfacing.
- Small compact design only 12 grams.
- Save money by upgrading over time or using components and wheelsets you already own.
*Except Shimano Tiagra 4700 10 speed shifters and rear derailleurMore info & order
Includes dynamo headlight bosses to mount on left or right sides.
Dimensions:
- 165mm Front to back on surface rack rails (overall length)
- 130mm Cantilever mounting bolt to surface rack rails
- 250mm Overall height approx. from cantilever mountings to top of rack.
Fits between 70mm and 80mm cantilever bolt centres plus a little extra adjustment with bending if needed.
MAX LOAD: 1500gMore info & order