Nitto
NITTO R10 Rear Bag SupportNITTO Rear bag support for seat piler-Seatstay.
Nickel Chrome Steel tube.
Chargeble 10kg, for seat plier 26.8-27.2mm.
125mmx225mm 390gMore info & orderNitto Stem MCR-22 Quill GravelTIG-welded CrMo quill stem with removable bar clamp.
– Dull bright finish
– Rise: 10°
– Quill length: 190mm
– Quill diameter: 22.2mm
– 4-bolt removable bar clamp
More info & orderNitto Handlebar B357AAF Choco 540mmA swept back bar similar to the Albatross in that it sweeps back a lot and has only a touch of rise. The grip angle is greater than the Albatross, but not quite 90 degrees. It has less forward bend than the Albatross, so the ends are a little closer to the rider. Fits bar end shifters and MTB levers/grips.
– Heat treated 2014-T6 aluminum
– Center: 25.4mm
– Width: 540mm
– Grip Area Length: 170mm
– Grip Area OD: 22.2mm
– Designed by Rivendell Bicycle WorksMore info & orderNitto CAMPEE FrontIn the dynamic world of cycling, where every pedal stroke tells a story and every road carries an adventure, this front carrier introduces a new chapter in the saga of travel on two wheels. A true alchemist who transforms the gravel paths into golden routes of delight, this rack provides a stage for the traveler to thrive in his wanderings. With its sturdy construction and robust design, this rack is ready to take on the challenges of any journey, whether braving the rugged gravel roads of the backcountry or exploring the cobblestone streets of a quaint village. It provides not only a place to carry your luggage, but also a sense of freedom and independence that is essential for the modern traveler.
●Hollow steel ●Maximum load: 16 kg ●For 700c ●Mounting hole lamp holder: M5 ●Bracket for cantilever brake base included ●Fixing screws included ●L295 x B240 x H490mm ●Bottom plate: L200 x B95mm ●1.185kgMore info & orderNITTO NJ-89 NJS 25.4mmNITTO Stem for ahead. Approved by NJS for woman's keirin. Angle 73°, clamp diameter 25.4mm, Pivot diameter 28.6mm
More info & orderNITTO UI-75 EX Silver 25.4mmNITTO stem for ahead. Aluminium forged anodized. Angle 83°, clamp diametre 25.4mm, Pivot diametre 28.6mm, 90mm 145g, 100mm 150gMore info & orderNITTO UI-85 EX SilverNITTO stem for ahead. Aluminium forged anodized. Angle 83mm, clamp diametre 26mm, Pivot diametre 28.6mm, 25.4mm with sim.
More info & orderNitto Barplug ColorBar plug for racing or MTB handlebars. Various diameters so can do both. Made of aluminum. With a color. So extra mojo.
EC-01 inside 20-22mm outside 24mm Ø
EC-02 inside 15.5-17mm outsite 24mm ØMore info & orderNitto BarplugBarplug voor racestuur of MTB stuur. Diverse diameters dus kan allebei. Gemaakt van aluminium, dus heel degelijk en bombproof.
EC-01 inside 20-22mm outside 24mm Ø
EC-02 inside 15.5-17 mm outsite 24mm Ø
More info & orderNITTO Craft-2Stem Cr-Mo steel chrome. Craft Piece of NITTO. Clamp diameter 25.4mm, Column diameter 22.2mm
More info & orderNitto Technomic quillstem 225mmThis is the classic Nitto Technomic spindle. The total length of the spindle is 23 cm, the part above the dashes 15.5 cm, which is the maximum length it can reach from the headstock, and different lengths in the front. Forged aluminum, nicely finished. Handlebar diameter is 26.0 mm or 25.4 mm.More info & orderNitto shims 25.4-26.0Adapter form stem 26mm to handlebar 25.4mm
More info & order